Auto Finesse Essence Carnauba Wax
Essence was born from the pursuit to produce the ultimate "all rounder” wax, a wax that provides crisp bright reflections on Silvers and Whites as well as it adds warmth and depth to dark metallics and solid paint finishes, a product that can be applied with ease and removed effortlessly. As professional detailers we understand that an LSP needs not only to provide stunning results and long lasting protection but it needs to be a pleasure to use, no one wants a product that causes you to apply more pressure than necessary to the surface, especially if you have just spent hours if not days polishing the paint, Essences oily nature means it spreads like butter, with a long cure time that allows you to apply to the whole vehicle before removal in hot climates as in colder ones too. All Auto Finesse waxes are carefully blended by hand in Great Britain from the finest quality natural ingredients available, and bring with them the same philosophy of performance and beauty as the rest of our detailing products. The waxes we use treat your vehicle with nature’s own defense against the elements, giving it water repellency, and resistance to environmental pollution (Including UV-fading, acid rain, and bird droppings.)… Auto Finesse Essence contains 40% T1 Grade Brazilian Carnauba Wax by volume, with the remainder being made up by synthetic polymers, and gloss-intensifying oils. Essence will provide 3 months of durability between coats. With a beautiful blueberry scent, and effortless application, few want to wait that long. Strong water beading and sheeting performance has always been important to us at Auto Finesse, and even with a wax dedicated to its ease of use its not shy of amazing water beading and sheeting properties. Whether your car or motorcycle has a modern clearcoat, or a classic single-stage paint system, Auto Finesse waxes will give it the protection it needs to survive the realities of everyday life. For the detailing professional or dedicated weekend enthusiast, there simply is no finer way to complete your flawless Auto Finesse style finish. Application: Before waxing, make sure that the vehicle is clean, and cool to the touch. If bonded contamination is present, use a Clay Bar to prep the surface for best results. If the paintwork is lightly marred, or the vehicle has not been polished in the last 6-12 months, it is also advisable to use one of our signature Pre-Wax Cleansers in order to create the maximum shine. Place an Auto Finesse Waxmate foam applicator inside the pot of wax, and rotate it half a turn to prime the pad with product. This is typically enough wax to protect a single moderately-sized panel, though this may vary depending upon the condition of the paintwork. Apply the wax to the panel with small, overlapping circular strokes, light pressure, and in a consistent pattern to obtain full coverage of the paint. If the applicator feels like it is starting to run dry across the surface, or coverage becomes uneven, return the applicator to the container using another quarter-turn of the pad to re-prime the foam. The goal when waxing is to apply the product as thinly and evenly as possible, since a little bit goes a very long way to protecting and enhancing the shine of your vehicle. Once you have completed one normal-sized panel, or half of a large one, move on to another section of equal size. When you are done waxing the second section, you will be ready to buff off the wax from the first using a plush Microfiber Towel. Alternating in between buffing and waxing panels until the vehicle is fully protected allows you to maintain the ideal curing times for the wax, and makes for very easy removal of the remaining residue. Auto-Finesse Passion only takes a few minutes to cure, so take care not to let the product dry onto the surface. If the wax has been allowed to dry, or ‘secondary hazing’ of the wax occurs (A phenomenon which can sometimes happen in hot or humid climates, especially if the product was over-applied.), you can use a water-based QD like Auto-Finesse Finale to help ease removal of the residue. When applying multiple layers of wax for extra depth, wetness, and protection, make sure to wait at least 3-hours in between coats to allow the organic solvents to fully flash. For best results, do not wax the vehicle if the ambient temperature is below (Approximately 6-degrees Celsius), or above 95-degrees Fahrenheit (35-Degrees Celsius). Waxing in direct sunlight, or conditions of high humidity can respectively lead to over, or under-curing of the product before removal.